Peter's z80.eu site blog
Windows Chicago Alpha / Pre-Beta Boot Screen and other... 
Wednesday, March 12, 2014, 08:55 PM
Posted by Administrator
Take a look at
http://monkey-hole.co.uk/esa/os/
for very early beta versions of Windows, there are even virtual machines (for Microsoft Virtual PC) to try something strange like Berkeley 2.11 BSD.
A bit simple/poor boot screen also for Windows Chicago Build 73, although it's very rare:


To remember: There is also an interesting blog which covers a lot of different virtual machines: http://virtuallyfun.superglobalmegacorp.com/

add comment ( 160 views )   |  permalink   |  related link   |   ( 3.3 / 93 )
Different Floppy Drive widths ? What did IBM wrong ? Or others ? 
Sunday, March 9, 2014, 08:00 PM
Posted by Administrator
Original 5.25" floppy drives in IBM PC or IBM PC/XTs are less wide than later selled floppy drives from other vendors (like TEAC or EPSON), that means 145mm from IBM, 147mm from others. And so 3.5" drive adapters are also too wide.
I was trying to add a second 3.5" floppy drive, but I couldn't. After 10 minutes, I gave up - I have the finding to rasp something from the side frame (about 1mm from each side).
This is really annoying. Only after expiriencing this for myself, I was able to find something about it in vintage-computer.com forum ... and all that after more than 30 years of IBM PC launch :-(
add comment ( 152 views )   |  permalink   |  related link   |   ( 3.1 / 4094 )
IBM PC/XT building site ... replacing cards and drive 
Sunday, March 2, 2014, 11:53 AM
Posted by Administrator
After recognizing many errors while reading and writing files on my MFM hard disk drive, I decided to exchange my hard disk drive with a SCSI one.
This resulted in a longer search for an appropriate 8-bit ISA bus SCSI controller, my favorites were Future Domain TMC-850 and Seagate ST-02. I was able to swap some ISA cards with a Seagate ST-02 finally.
Because this Seagate ST-02 also supported (physically, see note below) high density floppy drives, it came in my mind to add such a floppy drive, too.
This wasn't so easy as I thought, because the mentioned Seagate ST-02 controller didn't support HD floppy drives by included BIOS. Instead, only hard disk drive support is added by that BIOS :-(
So I had to look for an alternative solution. I tried "800.com", a BIOS extension from an italian author, but it doesn't work too. Luckily there was a working solution left, "2M30", which includes a BIOS extension 2M-XBIOS.EXE (you have to include it in your CONFIG.SYS).
Also, I had to figure out how to initialize that SCSI HDD, it worked not only with debug, but also with this nice small utility named "FINDINIT".

That's how it looked after several attempts to get it working. But I finally managed it, thanks to the 2M utility (see related link also):


P.S.: I found also a device driver named JDRDISK.SYS, mentioned in the vintage-computer.com forum. I had to patch it to get it running, because DOS version check was very strange implemented. Try for yourself, it still didn't worked for me to use HD drives with it.
add comment ( 167 views )   |  permalink   |  related link   |   ( 3.1 / 1799 )
Using MS-DOS 4.01 with virtual machines is a NIGHTMARE ! 
Saturday, February 1, 2014, 02:00 PM
Posted by Administrator
This is really weird. There are some web sites offering a floppy disk image of MS-DOS 4.01, but you can't do anything with it - except with a real PC.

Meanwhile I own an IBM PC XT, and I wanted to reinstall a DOS.
The DOS I used before was IBM DOS 3.2, but this DOS version's keyboard driver was not really compatible with my 101-key keyboard from Cherry (which can be configured also to be used with a PC XT, not only with an PC AT machine).
So I had the idea to try other DOS versions.
I tested Tandon DOS 3.3, but this version was NOT really usable. You are not able to transfer the MS-DOS system itself with FORMAT /S, instead, you have to use "FXPREP". This utility from Tandon did not really format my MFM HDD correct, it doesn't recognized most of the bad blocks of the HDD (it marked it again as usable.... not really helpful).
You have to use SPINRITE (or similar software) again to correct this.

So I had the idea to use MS-DOS 4.01... and then the NIGHTMARE began.

Because the offered MS-DOS 4.01 boot floppy disk images were 720KB or 1.44MB disks, I had the idea to convert them by using a virtual machine.
I tried VMWare Player 5 (and also later some other versions), but VMWare is NOT able to boot from a MS-DOS 4.01 boot disk - this is very strange.
So I took Oracle's Virtualbox again, and booting from the floppy worked.
BUT. After transferring all DOS files to the virtual harddisk, I was NOT able to copy them back to a (virtual) floppy disk drive. Virtualbox always assumed I have a 1.44MB capacity HD floppy drive, but I needed to write them back to a 360KB formatted floppy, to use it with my IBM PC XT.
So VMWare player is NOT able to boot from it, Oracle Virtualbox is NOT able to write it back to 360KB floppies. I am really disappointed from both virtual machine solutions.

This is all related to MS-DOS 4.01, older or newer versions will work also with both VM software.

But there is hope:
You have to use WINIMAGE from Gilles Vollant, load the (bigger) disk image, delete some files to let the sum of the files not greater than the target floppy capacity, and then change the "Floppy Disk Format" itself just by selecting another capacity in WinImage's function for exact that case. After saving the new disk with another name, it will be possible to use this - in my example 360KB - floppy disk image to boot MS-DOS 4.01 with Oracle's VirtualBox or with MS Virtual PC 2007. And later on with my PC/XT also :-)


Btw. - MS Virtual PC 2007 (after editing the .VMC file for an additional floppy id in section "super_io") is the only Virtual Machine software which can run MS-DOS 4.01 also from HDD ! You have to disable almost all "modern" things in BIOS (press DEL at the very first seconds of boot process), e.g. 32Bit Access, LBA, Hardware Virtualization a.s.o. - then it really worked, even the original INSTALL process, which copies vvveeerrryyyy slowly files (be patient, don't reset, just wait). You will be rewarded with DOSSHELL ;-)

add comment ( 164 views )   |  permalink   |  related link   |   ( 3.1 / 2221 )
"Free" mail service mail-online.dk is a deceptive package - a warning ... 
Wednesday, December 25, 2013, 02:30 PM
Posted by Administrator
Years ago, I have taken a free mail service, mail-online.dk, because I needed a second mail address for registering some programs etc.

I have taken this account also for playing an online game.
Now, 14 days earlier, mail-online.dk informed me, that it's not free anymore, instead, I have to pay approx. 7 Euros per month, and I have to take at least 6 month at once.
This change will be effective from January 1st 2014.
Regardless of the real short warning period, the minimum period of time I have to purchase (6 month!) and with that exorbitant high price. So I got a new problem, because my game vendor are not willing to change the email address of the game account in a few days. In fact, I am not sure they will change it fast enough, and then I can't receive any confirmation mails anymore.
The maliciousness of this is, that both, mail provider and game vendor, will not work hand in hand and so the only one who will be spoofed is me.
I guess the game vendor has enough players so they are not interested in keeping customers (who paid money for the game) anymore.
Unfortunately that game was the only one I got some fun while playing at the moment.

The bottom line: Do not trust in free mail providers.

P.S.: mail-online.dk has a sister company, weekonline.com (so I don't recommend them, too)

P.P.S.: I managed to tranfer my above mentioned game account. It's now tied together with a new mail-account - but not a "free" mail-account anymore, and no, not an expensive danish one.
add comment ( 164 views )   |  permalink   |  related link   |   ( 3.1 / 3413 )

<<First <Back | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | Next> Last>>