Peter's site blog

Please read ! 
If NO IMAGES will be shown, use instead of


I have prepared a new blog with wordpress at !!!

Thank you.
VGACOPY is running again - but not with the Pentium 200 CPU... 
Tuesday, June 5, 2018, 12:00 PM
Posted by Administrator
It seems that something is very different with the Pentium 200 Board (in a 430FX mainboard).
I exchanged the ASUS P55TP4 with a SOYO SY-5EAS5 board, and plugged in an AMD K6-2/400AFR CPU. Surprisingly VGACOPY is running again (reading a 360KB floppy disk in a 360KB floppy disk drive), but HD-COPY 2.0a is still not working. This is indeed a surprise, because my first theory about it was, a faster CPU makes more problems than a slower CPU. But the AMD K6-2/400 is definitely faster than a Intel Pentium 200 (no MMX).
Will stop with further investigations, also because floppy copy programs aren't really worth to start a one-year project ;-)

Btw.: CCS64 v3.92 (running with Windows 98) is working very well with that AMD K6-2 CPU, fast enough to emulate a C64 with 100% speed and excellent compatibility.
WinVice, even the DOS version, isn't optimized for speed. It's about ten times SLOWER than CCS64...

The DOS version of CCS64 v2.0 is running even with the Pentium 200 with enough speed, but unfortunately without good compatibility (e.g. Bomberman - see picture - isn't working with the v2.0)

(related link points to CCS64 web site)
add comment ( 269 views )   |  permalink   |  related link   |   ( 3 / 1862 )
Cont'd test of disk copy programs (Part 5)  
Tuesday, May 22, 2018, 04:30 PM
Posted by Administrator
Last but not least I tested Disk Copy Fast and Disk Copy Plus, which seems to be almost the same (the first one is the shareware version, the second one seems to be the full version).

Both are working very well, even with the 360KB floppy drive in my Pentium machine.

A true exception is Locksmith, this name is well known since years for Apple II users.
It seems NOT to be related with the makers of the Apple II version, although it is also usable as a disk copier, but not only. The usage of the program is a bit cumbersome:

I do not recommend it.

(for the 4th part of the article series, go on >here<)

The "related link" points to a download site with Disk Copy Fast, but also other already described diskcopy programs.
add comment ( 137 views )   |  permalink   |  related link   |   ( 3 / 1988 )
Cont'd test of disk copy programs (Part 4)  
Monday, May 21, 2018, 10:00 PM
Posted by Administrator
Now the rest of the "gang". QCOPY Professional works quite ok, Blitzcopy seems to be the same but is a trial version for it. It can be used without loaded mouse driver (pressing the TAB key very often), although it's a lot of easier to use it with a mouse.

Remember you have to deselect multiple sources/targets if you just want to copy one disk.
Also, the option "Diskette Change" means the program waits for a DC signal coming from the drive itself, if you exchange the floppy disk. This can be tricky if you are using a floppy drive with READY signal only and an isolated pin 34 (only one side of the pcb !).

CopyStudio looks also really nice, although it is a bit difficult to use (too many buttons with non-standard names) and it's a time limited version (not yet reached the limit/not tested):

The "related link" points to an URL for downloading Blitzcopy.

(for the 3rd part of the article series, go on >here<)
(for the 5th part of the article series, go on >here<)

add comment ( 148 views )   |  permalink   |  related link   |   ( 3 / 2672 )
Cont'd test of disk copy programs (Part 3) 
Monday, May 21, 2018, 09:30 PM
Posted by Administrator
So I tested also X-COPY from Cachet Software, see below "related link" for a download link.
This seems to be only copying unprotected disks, with some program failures, too :-(
It looked very nice, still:

The version I tested copies, depending on your choise "FATCOPY" or "ALLCOPY", only used sectors or all sectors of a floppy disk. Depending of this choice also, you get an error message dialog from the program itself, if a 360KB drive is select as source or target ... so this X-COPY 1.28 is not really usable for all tasks. In other words: Copying a 360KB floppy disk in a 360KB floppy disk drive seems to be NOT working.
You can use it without a loaded mouse driver (Cursor keys, Function keys, Enter key).

Also, I tested FROGCOPY, which has like X-COPY a nice graphics screen. It copies all unprotected disks very well, so I can recommend it for daily copying.

(for the 2nd part of the article series, go on >here<)
(for the 4th part of the article series, go on >here<)
add comment ( 269 views )   |  permalink   |  related link   |   ( 3 / 3533 )
Cont'd test of disk copy programs (Part 2) 
Sunday, May 20, 2018, 08:10 PM
Posted by Administrator
This is HD-COPY, the status information can be found in the lower right corner:

It's NOT working with the Pentium 200 PC, like VGACOPY.

COPYIIPC (all versions) and also COPYWRIT (all versions) are crashing, they will not even show up a program dialog at all:

DISKDUPE and DOSDUPE are working fine:

Usage of DISKDUPE is a bit difficult, you MUST use a MOUSE driver. Also, it's usually found only as a time limited trial version...

>First part of this article series<
>Third part of this article series<

(related link points to download link for DOSDUPE)
add comment ( 405 views )   |  permalink   |  related link   |   ( 3 / 459 )

<<First <Back | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next> Last>>