Peter's z80.eu site blog
Search 

Please read ! 
If NO IMAGES will be shown, use www.z80.eu/blog instead of blog.z80.eu

Please note also - THIS BLOG ENDS HERE WITH THE LAST ENTRY FROM NOVEMBER 9th 2021.

I have prepared a new blog with wordpress at https://vintagecomputing.info !!!

Thank you.
I didn't had (at least) the right video card ... 
Sunday, September 17, 2017, 05:14 PM
Posted by Administrator
... to install DirectX 3.0 and later on, Diablo 1. That's because if you install a video driver from Windows 3.1 (but used in Windows 95), there is no hardware acceleration nor DirectDraw support.
The Diablo 1 CD included also a "Test your PC" feature, and beside the fact I didn't had a Pentium 60 (at least) installed, it needed also a CD-ROM with 300kps minimum data rate and ... tataaa ... a DirectX compatible driver/card.

I was soooo close to it, see my photo:


add comment ( 171 views )   |  permalink   |  related link   |   ( 3 / 3082 )
Forgot what it means: Installing Windows 95 (first edition) on a 486 PC 
Saturday, September 16, 2017, 11:00 PM
Posted by Administrator
I rebuild a 486 PC with some spare parts, and because it had 32MB RAM, I thought it would be a good idea to install Windows 95... YES, this first rolling stones ("start me up") driven meanwhile ancient operating system.
Unfortunately I didn't have an IDE CD-ROM yet available for it, so I decided to recreate the floppy disks for installing Windows 95 from my Windows 95 CD-ROM (using my modern PC).
This was not so easy ... while googling for it, I found a lot of hints about Windows 95B (OSR2) installation, also describing how and what to copy onto the floppy disks, but hey, Windows 95 (first edition, 4.00.950) differs here totally !
Infos I found about a "WIN95_02.CAB" file were misleading - there is not such a file for the first edition. There is also no need to format floppy disks in DMF format here.
But it's not difficult - the bootdisk has to have at least the OEMSETUP.* files,
and the first installation floppy disk (No. 1) must include these files:
DELTEMP.COM, DOSSETUP.BIN, EXTRACT.EXE, MINI.CAB, MSBATCH.INF, PRECOPY1.CAB,
README.TXT, SAVE32.COM, SCANDISK.EXE, SCANDISK.PIF, SCANPROG.EXE, SCANREG.EXE,
SETUP.EXE, SETUP.TXT, SMARTDRV.EXE, WB16OFF.EXE, WINSETUP.BIN, XMSMMGR.EXE

The second installation Disk contains only PRECOPY2.CAB, and the 3rd one just PRECOPY3.CAB and WIN95_03.CAB. All subsequent floppies contain a WIN95_XX.CAB file, while XX is the number of the disk, starting with No. 04 up to No. 22. Btw. the german version of Windows 95 has an INFO.TXT file instead of README.TXT ;-)
At least 30 minutes later, the base installation was finished.

What I didn't knew before - the video card was an ET3000 and Windows 95 did not recognized this, but you can surprisingly install drivers also from Windows 3.1 (there were no Windows 95 driver for the Tseng ET3000). Now I was even able to set 256 colors (instead of the default 16 colors).

Next project for me: Installing the first Diablo game (from Blizzard)... stay tuned.
add comment ( 185 views )   |  permalink   |  related link   |   ( 3 / 2241 )
UCSD p-SYSTEM for IBM PC - bootable and not MS-DOS related, not the usual psys22.zip file 
Saturday, August 26, 2017, 12:00 PM
Posted by Administrator
Looking for the Pecan UCSD Pascal / p-system disks (which can't be found for download in the Internet), I digged out two disk images while visiting an almost unknown forum.
Because the images were in IMD format, I had to unpack them first with IMDU before I can try it with a virtual PC (VMware Workstation etc). But the images were not usable (or seems to be not usable). But I didn't stop trying and I also took PCem for it, and while choosing an "IBM PC" for emulation, it suddenly works (it stops booting for about 10 secs, but went on working, showing the start menu selection !).
So the first learning was, it does ONLY run on 8088/8086, not on a later Intel CPU (like 286, 386 a.s.o).
This is it after booting (doing nothing else):


And these are the contents of the two disks, showed with "(F)iler":




Last but not least this is the (unusual) editor:


The disk images are in RAW format, and have a structure of 40 tracks, single sided, 8 sectors/track. Not sure if this can be changed to an other disk format, because you have to change the p-System code also.

See related link for the attached ZIP file with the disk images.

P.S.: I have also a page for UCSD software, see >here<.
add comment ( 578 views )   |  permalink   |  related link   |   ( 3.1 / 3567 )
ATI EGA Wonder used in / for an IBM Portable PC 
Saturday, May 27, 2017, 03:00 PM
Posted by Administrator
Promised, this is the last entry about the (beautiful) IBM Portable PC 5155.
I replaced my original, really long CGA card with an ATI EGA Wonder (first series).
And I was surprised how good many EGA capable games are looking.

EGA high resolution with 640x350 pixels don't seems to work with the composite monitor:

But "Blockout" (a 3D Tetris alike DOS game) DOES work with 640x350 pixels. So it seems that some games forces a higher vertical frequency and some not. You have to try what game does work and what not...

But mid res EGA (320x200x16) does work always, and looks very nice:

(this is Arkanoid II, Revenge of Doh)

And of course, CGA games are still possible:

(this is TAPPER, a real classic for the PC/XT category computer)

Also, 640x200x16 (EGA high res with 200 lines) is also possible with the build in CGA composite monitor of the IBM Portable PC.

Btw. >vgamuseum.info does NOT list the used ATI EGA Wonder<. This version has 3 large integrated chips, 2 from CHIPS Technology and one gate array chip from National Semiconductor, named "SCX6244":

Unfortunately the original software floppy disks can't be found anymore, I only found the "SMS.COM" video mode switching program for DOS.

To show PCX images, I used 2SHOW (CompuShow 2000, runs on a plain IBM PC/XT and can also display JPG for example).
Many image viewer and converter for DOS can still be found, see "related link".
add comment ( 629 views )   |  permalink   |  related link   |   ( 3 / 2269 )
A word about 'Spinrite' ... a repeatedly echoed myth from many forum users 
Saturday, April 29, 2017, 01:00 PM
Posted by Administrator
Spinrite is a hard drive diagnostic software, and was first published in 1987. The last version 6.0 was published in 2004. Before I go on with my explanations, remember, Spinrite should be necessary only for MFM and RLL drives, modern IDE drives have their own defect management.

Last time I recognized my IBM Portable PC has at least 110KB clusters marked as bad. But I didn't expirienced problems so far (read or write errors), so I was happy. But even 110KB are space which you could need, so I decided to "refresh" the 20MB MFM hard drive with Spinrite II. After 4 hours only 15% were processed, so I decided to stop it with pressing ESC, which is NOT a hard break, Spinrite finishes it's last action (last processed cluster).
Now I tried to boot again and guess what, NOW I had read errors. Also, the drive seeks desparately for a readable sector often. CHKDSK results in 250KB bad clusters.

This was surprising for me first, because BEFORE I started Spinrite, there was no noticeable error !
Also, I got many defective directory entries, which I could NOT REPAIR with CHKDSK /F.

But meanwhile I understood what happened. For such an old MFM hard drive, this is a torture or at least stress. So instead of doing something good, I tried to kill my MFM hard drive.
A full Spinrite run take many hours, and can't be compared to a normal load of software usually used for such a computer.

So the best idea is NOT USING SPINRITE SNAKE OIL, instead, try to backup what you want first, start low level formatting by using the controllers BIOS (start DEBUG, enter "g=C800:5"), then boot with a working DOS floppy disk, use FDISK and FORMAT C:/S, and restore the saved files back. Last but not least, as already stated, the processing time of Spinrite is far too high - it can take days, not hours. A low level format by using DEBUG take minutes only but refreshs the sectors (re-magnetize them), too.

If in doubt about the drive health, you may use a DOS 6.2 (6.22) boot disk with SCANDISK, to detect unreadable clusters. I recommend NOT TO USE Spinrite, because your old drive will hate you for it. Believe me.

SCANDISK should be called with the parameter /SURFACE and for monochrome screens with /MONO, too.
add comment ( 267 views )   |  permalink   |  related link   |   ( 3 / 2283 )

<<First <Back | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next> Last>>